Primed Finger Jointed Wood Door Jamb

What is a flat door jamb?

Flat jambs have a standard jamb, 4 9/16" wide, with a separate door stop attached, usually stapled, and the hinge side of the jamb is the pre-cased side. Casing is stapled and glued, and has corrugated fasteners at the miters.

Products Show

We do know straight and dado quality is very important for Door Jamb.We would like to show you how we control the quality as following:

1.Straightness 

Put the door jamb against a very straight Alu core. Our wokers inspect pieces by pieces strictly and pick out the unqualified products before packing. We make sure every piece is up to standard.

2.Dado

Dado is a very important part of flat jamb. From photos, you can find our dado is cuted very accurately.

3.Need to be nailed easily.

We have sent large quantities of door jamb to North America. Till now, there is not client said it is hard to nail. So pls do not worry about it.

Manufacturing process

---- Timber cut into board,Kiln dried, FJ,Via Shape, Sanding, two coat primer and packing etc

The surface finished of door jambs is white primed which it is ready for painted. During the production process, the timber is kiln dried to consistent moisture content before machining and finishing. This ensures that Door Jamb / Door Frame is not prone to distortion or raised grain. Finger jointing and lamination of the timber components further enhances the stability and strength.

We are committed to providing customers with good and stable quality, we always believe that good quality is the core and symbol of an enterprise.

Welcome to your inquiry .

Hot Tags: primed finger jointed wood door jamb, China, manufacturers, suppliers, factory, wholesale, mill, door jamb too wide, 110mm door jamb, 2x6 exterior door jamb, door jamb for french doors, a jamb, grooved door jamb