Wall Baseboard Floor Finger Joint FJ Skirting

When installing wood baseboard moulding, here are some common mistakes to avoid:

1. Improper Installation Technique
Not Using Enough Glue or Nails: Using an insufficient amount of wood glue can cause the moulding to come loose over time. Similarly, spacing the nails too far apart (more than 16 inches in most cases) may not provide enough support to hold the moulding firmly in place.
Nailing at the Wrong Angle: Nails should be driven at a slight angle through the moulding and into the wall. If nails are driven straight in, they may not hold the moulding as well and could cause the moulding to pop out or become loose more easily.
Not Countersinking Nails Properly: If nails are not countersunk below the surface of the moulding, it will be difficult to fill the holes and achieve a smooth finish. This can result in a visible nail head and an unprofessional - looking installation.

2. Lack of Attention to Detail Around Openings
Poor Fitting Around Doors and Windows: When installing around doors and windows, it's crucial to cut the moulding to fit precisely. Failing to make the necessary notches or miter cuts to accommodate the frame of the door or window can lead to a messy - looking installation. The moulding should follow the contour of the opening smoothly.
Ignoring the Gap between the Moulding and the Floor: There should be a small, consistent gap (usually around 1/8 - 1/4 inch) between the bottom of the moulding and the floor to allow for expansion and contraction of the floor. If this gap is too large or too small, it can affect the appearance and functionality of the baseboard.

Q: Can we make customized sizes?
A: Sure, we can manufacture as your sizes and drawings.

Hot Tags: wall baseboard floor finger joint fj skirting, China, manufacturers, suppliers, factory, wholesale, mill, wood tile baseboard, white baseboards with wood door frames, baseboard trim for hardwood floors, wood base moulding profiles, wood baseboard over tile wall, wood fence with baseboard