Primed Crown Moulding

Crown Moulding-One of the most recognized home trim pieces, crown and cove molding steal the show in any room. Crown molding is typically used at the junction of an interior wall and ceiling. Usually it is not placed flush against the wall nor against the ceiling. General term for any molding at the top or "crowning" an architectural element.
Instead, when viewed from the molding's end (or as a cross-section), it, the ceiling, and the wall form a "hollow" triangle. This adds a difficulty to the installation process, namely the need for complex cuts to form corners where two walls meet.

1)Species:Radiata Pine
2)Moisture content:10-12%
3)F/J gesso primed
4)Environment friendly,not easy crack
5)No any defects on surface allowed (color difference,size difference,machine trace etc

Production Process:
1)The timber logs are cut into boards.
2)Then kiln dried to within 8-12% moisture range to ensure stability through the successive manufacturing processes.
3)After KD,the boards should stay in the warehouse for more than 20 days(Note that diffreent size board require different days),to keep the material more stable and to make moisture content more uniform. It's very important.
4)The defects on the board will be cut before finger jointed. The length of moulding can be finger jointed up to 17ft,or as customized.
After that, the finger jointed board would be through rough sanding, then make into shape(as customers' drawings) by the molding machine.
5)The surface finished of our pine products have two coat primer, the primer is a mixture containing glue and calcium carbonate. Coating application would be applied equally on all edges have a strong adhesion to the wood substrate. If the trim board is used for External construction applications, the primer should be external glue,and the price is a little higher than Interior using. If it's used for interior decoration, the primer can be interior glue.
6)Each pcs products will be inspected by our workers.Then arrange the packing.

The advantage of our wood ceiling moulding:
1.Good quality raw material.
2.Moisture content of finished product is between 8-12%
3.Dimensional tolerance: thickness and width: ±0.4mm; length: ±2mm 
4.No visible defects like patching,open finger joints,bleed through.
5.Water-based paint is environmental and friendly to human being.

Q: What about the payment methods?
A: We accept T/T, L/C for big amount ,and for small amount, you can pay us by PayPal, Western Union, Money-gram, Escrow and etc. 

Q: How much does it cost to ship to my country?
A: It depends on seasons and which country. 

Q: What’s your delivery time?
A: Usually we produce within 25-30 days after the payment confirmed

Hot Tags: Primed crown moulding, China, manufacturers, suppliers, factory, wholesale, mill, crown molding for ceiling lights, waterproof crown molding, exterior fascia crown molding, flying crown molding, ceiling molding for light fixture, standard crown molding