Introduction Of Six Common Cabinet Boards

Cabinets are an important part of the kitchen. They can not only store kitchen utensils, tableware, kitchen appliances, etc., but also beautify the kitchen environment, so be careful when choosing. What material is the cabinet made of? Here are six common types of cabinet boards.

1. Composite multi-layer solid wood

Composite multi-layer solid wood skirting board is a board with high environmental protection, good practicability and long service life. If there is a demand for this and family conditions allow, it is a good choice, because the price of this board will be slightly more expensive. And composite multi-layer solid wood cabinets can be used in heavy humid environments.

2. Moisture-proof board

Compared with other functional areas in the kitchen, the environment is definitely more humid, so the boards used in the cabinet must have good moisture resistance, and the moisture-proof board is very good, it can be used in a heavily humid environment, and it is suitable for the cabinet as a cabinet. body material used.

3. Particleboard

Particleboard is made of fresh wood, beaten into coarse fibers and hot-pressed at high temperature. The particle board made of broken wood avoids the problems of solid wood being easily cracked and deformed. However, the moisture-proof performance of particleboard is much worse than that of moisture-proof board. Moisture-proof agent must be added in use, otherwise it will be prone to mildew and corrosion if it is in a humid environment for a long time.

4. Blockboard

Blockboard is a core board made of wood that is processed into the same specification by a saw planer, and then glued together. It has glued veneers on both sides. Blockboard has a large format and is easy to saw and cut. Its material has strong toughness, strong bearing capacity, and is not easy to crack and moisture-proof, but it is prone to delamination and bending deformation.

5. MDF 

MDF is pressed from wood powder, and its flatness is good, suitable for milling and forming. The material is softer, and it is not easy to burst the edge during edge sealing, and it is easy to process. However, its raw material is wood flour, so its moisture-proof performance is average, and it is easy to expand and deform when exposed to water.

6. Ecological board

The ecological board is a melamine surface attached to a large core board or a sandwich board, which is a plywood with a solid wood core. The log is cut into strips, spliced into cores, and the outer veneer is processed. The force of the whole board comes from the thin two layers of outer veneer, and the middle is spliced by wood blocks, so it is basically unstressed and easy to use. break or deform.