Installation And Construction Steps Of Wood Mouldings

Mar 01, 2019

Construction preparation

1, before the construction of the closure, should be ready to close the wood decorative mouldings, and the moulding selection.

1. The wood decoration moulding should be removed from the moulding of distortion, scar crack, decay part.

(2) should also pay attention to the color of wood decorative mouldings should be consistent, moulding thickness uniform.

(3) the surface of the wood decorative mouldings should be smooth without pits, without damage.

2. When preparing materials, it should be noted that wood mouldings with the same base material and the same surface color can be closed first, and then the surface can be decorated with the base at the same time. With the base body material different or the wood moulding of different colour, can finish in base body facing after, undertake alone again close mouth operation.

3, the basic level of treatment: check the seam of the seam of the base plane fixed firmly, whether there are uneven phenomenon, and check the cause, reinforcement and correction.

installation

1, wood decorative mouldings fixed: when conditions allow, should try to use adhesive fixed. If you need to nail, it is best to shoot nail gun, he nail nail when nail is not allowed to show the nail head. The place of nail should be in the groove of wooden moulding or the side of back moulding of sight. For example, when the height of semi-log moulding is less than 1.6m, it should be nailed to the lower part of the Central moulding of the wood moulding; when the height is greater than 1.7m, it should be nailed to the upper part of the Central moulding of the wood moulding.

2, wood moulding splicing: you can use straight spelling or corner spelling.

(1) straight spelling: is to open wood mouldings in the mouth into 30 or 45 Angle, cross section after adding glue spell mouth, spell mouth requirements smooth, not dislocation;

(2) Angle spelling: put the moulding on the 45 fixed-angle device, saw saw (ensure no edge), section coated with glue on the spelling, pay attention not to have dislocation and from the seam.

3, note: wood decorative mouldings of their own mouth position, should be away from the person's moulding of vision, should be placed in the indoor inconspicuous position.