European wood mouldings of the structure of what, construction time should pay attention to what

Ou shimu moulding is the data that does not lack in ou shimei is decorated, it is ok not only natural wood moulding is used to do the sealing edge moulding of metope, furniture perhaps door appearance receives edge moulding, still can use the exterior moulding that makes ceiling plane to wait a moment. Today, let's talk about the main points of the European wood moulding structure and construction at the notice of matters.

First of all, the European wood moulding structure of the introduction.

1, day: ceiling is not the same layer of European wood mouldings at the intersection of the surface of the sealing edge, ceiling on the moulding manufacturers with different wood moulding with the face of the joint sealing, the surface of the surface of the ceiling, the appearance of the moulding, the sealing edge of the equipment on the ceiling.

2, smallpox corner moulding: smallpox and the wall, smallpox and cylinder of the handover of the azimuth seal.

3. Wall moulding: sealing edges at the joints of different layers on the wall, docking azimuth sealing of different material surfaces on the wall, dado edge pressing, skirting edge pressing, sealing edge decoration of equipment, wall facing data pressing and wall decoration exterior mouldings. Build body, decorate the moulding on partition wall, screen to close mouth and decorate a moulding, and of all kinds of furniture on close a moulding to decorate.

4, the door moulding: the door is not the same level of the intersection of sealing, not the same material plane docking azimuth sealing; Veneer information pressure moulding, exterior decoration moulding, etc.

Look again the construction of moulding of Europe type wood notes a business.

Construction preparation

1, before the construction of the closure, to prepare the closure of wood decoration mouldings, and the implementation of moulding selection.

(1) to the wood decoration moulding to get rid of distorted mouldings, scar crack, pedantic some.

(2) but also pay attention to the wood decoration moulding color to common, moulding thickness uniform.

(3) wood decoration moulding appearance to lubrication without pits, without damage.

2, in the preparation of information should pay attention to, and the general information of the same, the same color of the surface of the wood moulding, you can first after the mouth, and then the matrix together for the surface. The wood mouldings with different colors or different materials from the base can be closed by themselves after the base finishes.

3, basic level processing: check the seam orientation of the base plane fixed is not solid, on the seam is not uneven, and check the factors, reinforcement and correction.

Plant construction

1, wood decoration moulding fixed: conditions allow, try to use adhesive fixed. If need nail joint, good take to shoot nail gun, he nail joint not to show nail head. Nail position in the moulding of the groove or back side of the field of vision. For example: when the semi-log moulding azimuth height is lower than 1.6m, it shall be nailed in the lower azimuth of the Central moulding of the wood moulding. When the height is greater than 1.7m, it shall be in the upper azimuth of the Central moulding of the wood moulding.

2, wood moulding splicing: you can use straight spelling or corner spelling.

(1) straight spelling: that is, the wood moulding in the azimuth into 30 or 45 Angle, cross section after adding glue spell mouth, spell mouth demand smooth, can't dislocation;

(2) Angle spelling: put the moulding on the 45 fixed-angle device, saw saw (ensure that no edge), cross section touch on the glue to spell, pay attention to not have dislocation and from the joint scene.

3, pay attention to matters: wood decoration moulding of their own, to be away from the person's moulding, to be placed in the indoor inconspicuous.