The main must-see key for the construction of wooden mouldings

With the ever-increasing selection of wooden background walls by the owners, and because of the solid texture of the decorative mouldings and the simplicity of the installation, the owners want to know more about the construction key of the wooden installation.

First, the masonry background wall pre-work preparation

Before the wall unit is installed, the wall should be leveled and the wall should be coated with a moisture-proof layer for maintenance. When selecting the wood moulding, the back surface of the request data is flat, the appearance is smooth and flat, and the maintenance paint is even. The elastic moulding can be carried out according to the width of the wooden moulding, and the wall surface can be air-dried for construction.

Second, the wall punching device wooden wedge

In the beginning of the boring wall construction, in order to make the wooden wall of the wood moulding more solid, the frame wedge can be used to bind the wooden wedge on the wall as a bracket. The requesting device is aligned with the bullet moulding and the wooden wedge is flat and close to the wall. In this way, the wall material can be more evenly stabilized, and the lighter wood mouldings can be directly mounted on the wall without using wooden wedges.

Third, the wood moulding device operation

The wooden moulding of the device is on the wall, and the nailing method is adopted first. The nail is fixed in the groove position or the back view surface, and the nail head should be smashed in and out, and the wooden moulding fixed wall does not appear loose, and can be supplemented with glue. The splicing of the wooden mouldings is carried out, and the cross section is glued, and the punch is requested to be smooth and the overall alignment is flat.

Fourth, the wood moulding background wall considerations

Use the wooden mouldings as the background wall, pay attention to the accurate design of the design drawings, the bullet moulding is clear, so the orientation of the device can be accurate. When the wooden mouldings are joined, the seams are requested to have no wrong edges, the cutting angles are regular, and the viewpoints are common. Each piece can be positioned to carry out the next piece of equipment.