Adornment Wood Moulding Has What Advantage In Due
Mar 10, 2019
Adornment wood moulding is commonly used polymer bonding mortar and metope, polymer mortar is put organic adhesive in the cement mortar mixing inorganic material, long using life, adhesion strong, and has been the national standards and standards, and in many engineering proved to be safe and reliable in use, thus avoiding the as anchor bolt is fixed to the construction and the risk of anchor bolt corrosion, and basically solved the exterior insulation of cold and hot bridge problem.
What advantage does adornment wood moulding have in due?
1. Optional processing of appearance. moulding selection computer description appearance, active cutting, short production period.
2. Convenient installation. The use of special bonding materials and methods, a person can be installed construction, especially large amount of moulding works, just the bond device.
3. There is no gap between the mouldings. Applied between adornment wood moulding and metope bond the aperture like to add fill material, aperture all disappear, also won't present crack in applying henceforth.
The material composition of the wood moulding
Ceiling: the ceiling of different levels of natural wood moulding manufacturers at the edge, the ceiling of different materials at the surface of the joint sealing, ceiling plane on the European moulding manufacturers modeling moulding, the edge of the ceiling equipment.
Smallpox horn moulding: smallpox and metope, the joint of smallpox and cylinder is sealed.
Metope moulding: sealing edges at the joints of different levels of surfaces on the wall, sealing edges at the joints of different material surfaces on the wall, edge pressing of dado, skirting, edge pressing of equipment, edge decoration and wall facing materials,
Metope decorates modelling moulding. Build body, adornment to separate a wall, the moulding that close a mouth on screen and adornment moulding, and the moulding that receive edge on all sorts of furniture is decorated.
Door moulding: sealing the edges at the joints of different layers of the door and sealing the joints of different material surfaces; Facing material pressing moulding, appearance decoration molding moulding, etc.
