What Is The Size Of The Wood Moulding?

The Wood Moulding is actually made of relatively fine wood and the hardwood is dried and processed by the natural Wood Moulding manufacturer. It can be used for surface joints of decorative works such as wall decoration and furniture making. Its main function is to connect, close and make shapes.

First, the type of wood

Although the decorative lines are not the main location for interior decoration, the role of European line manufacturers cannot be underestimated. It mainly plays the role of finishing touch. The main tree species used to make wood threads are: teak and beech (mainly red enamel). , white wood, gray, eucalyptus, etc.

1. Different materials used

According to different materials, it can be divided into solid wood wire, finger wiring, wood-based panel wire and wood-plastic composite wire.

2, according to the shape of the product

The main function of the Wood Moulding is two, one is the decorative effect, mainly to cover the poor visual part with carefully processed lines. The second is the protective effect, especially in the closed position of the veneer. In order to prevent the surface of the veneer from affecting the use effect, you can choose to use wood. The substrate is one of them.

Second, the size of the Wood Moulding

The wood size of the Wood Moulding is 30 * 50mm. It mainly refers to its length and width. This is usually used to hang wooden keels, and some can also be used for certain internal structures. The size of the molded article is also 60 * 90 cm. Some of these specifications are the framework of teacher furniture, which is rare in modern homes. There is also 120 * 40mm. This line size can be referred to as the door side. It is used to make the skeleton of the door. Both sides are at the post office.

The thickness of the wooden skirting board is thinner and thinner, up to 5 mm thick, which can be nailed to the wall, saving manpower and materials. The height of the Wood Moulding is generally in the range of 100 to 150 mm and the length is several meters. It is mainly made of hardwood processing.

You can use beveled lines between different surfaces (you can also use metal lines). Wood threads are usually secured with an adhesive and then nailed or nailed. The nail head should be flat and the nail should be positioned on the side of the groove or line of sight of the wood. When the height of the semi-circular wood strip is less than 1.6 m, the nail is located at the lower portion of the circular line; when it is larger than 1.7 m, the nail is located at the upper portion of the round line.